Tissue Cell Culture Products from MIDSCI

  TC Products | Related Products | TC Information & Protocols | MIDSCI Home Page | Contact Us
Other Tissue Cell Culture Related Products

Basic Tissue Cell Culture Products

Tissue Culture Information & Protocols

Laminar Flow Hoods & Workstations

LAMINAR FLOW HOODS AND WORKSTATIONS

 

Bioklone Series II Biological Containment HoodsBioklone Series II Biological Containment Hoods

The Bioklone Series II Biological Containment Hoods are both CSA and NSF International approved and are designed to protect the operator, the product, and the environment. The Type A cabinets are suitable for work agents assigned Biosafety Levels 1, 2, or 3 in the absence of volatile toxic chemicals and radionuclides. The Type B3 cabinets are suitable for agents assigned to Biosafety levels 1,2, or 3 treated with minute quantities of volatile chemicals and tracer amounts of radionuclides as an adjunct to microbiological studies that will not interfere with the work when re-circulated in the down-flow air.

The Bioklone Series II Biological Containment Hoods feature a special exterior chemical resistant paint finish. The interior work zone is manufactured from Type 304 stainless steel with all coved corners for easy cleaning. The air is filtered through HEPA filters, 99.99% efficient in all particles 0.3 microns and larger. The HEPA filters are easily replaced from the front of the hood. More information . . .

 

Captair Ductless Fume HoodsCaptair Ductless Fume Hoods

Recommended for the handling and elimination by filtration of gases, vapors, particles, toxics, and odors, the Captair ductless fume hoods can be used in all laboratories (analytical, research, control, industrial, educational, etc.) for all handlings involving acids, solvents, gases, vapors, dusts, and odorous materials (toluene, alcohol, xylene, formaldehyde, sulfuric acid, etc.).


Without ducting, the Captair ductless fume hoods can be assembled and operational in one hour. Placed on a Mobicap rolling cart, they can be moved easily within your lab according to your needs and in complete safety. Easily assembled and disassembled. Captair hoods are easily moved from one work surface to the next: electrical connections only require a simple standard plug. Access to fluid and electrical cables for the connection of instruments placed within the enclosure is done by removing the plastic cap from the round opening found on the hood?s back panel.

 

The user is completely protected from spills thanks to a synthetic glass door resistant to high temperatures. All the electrical components are located outside the enclosure and protected from corrosion or flammable gases. All electrical components have been approved according to manufacturing standards: CE, DIN, etc.
. . . More Information

Ecomony Plus Benchtop Series WorkstationsEcomony Plus Benchtop Series Workstations

Features:

  • High Density Particle Board Construction
  • Exposed Surfaces Covered With Formica (Or Equal)
  • Motor/Blower Speed Control
  • Stainless Steel Polished Work Surface*
  • Comfort Ddge Soft Neoprene Saves Elbows & Garment Sleeves
  • Inclined Monometer Static Pressure Gauge
  • Traverse Fluorescent Fixture*
  • Duplex Electrical Outlet*
  • Ultra-Violet Lamp*
  • * Optional At Additional Cost Laminar flow Benchtop Series WorkstationsMore Information . . .

Laminar flow Benchtop Series Workstations

Features:
•High Density Particle Board Construction
•Flip Top Light Access
•Exposed Surfaces Covered With Formica (Or Equal)
•Motor/Blower Speed Control
•Stainless Steel Polished Work Surface*
•HEPA Filter Indicator Warning Light
•Comfort Edge Soft Neoprene Saves Elbows & Garment Sleeves
• Sealed Light Lens
•Duplex Electrical Outlet*
• Magnehelic Static Pressure Gauge*
•Ultra-Violet Lamp*
*Optional at Additional Cost

. . . More Information

The Absolute Console Series Laminar Flow WorkstationThe Absolute Console Series Laminar Flow Workstation

The revolutionary "Absolute" concept eliminates the risk of a leaking seal by permanently installing the HEPA filter into a disposable plenum. This means the filter seal is completely eliminated, thus only the filter media is under direct air pressure and, since there are no seals used in the "Absolute" concept, no seals can leak. Another advantage of the "Absolute" concept is that when the HEPA filter becomes contaminated to the point where it is no longer effective in reference to velocities through the filter, the entire filter and plenum are disposed of and a new replacement unit, intact, is substituted. The conventional method of replacing HEPA filters is quite involved, time consuming and costly. The "Absolute" concept eliminates this extensive and expensive process since the plenum and the HEPA filter are integral. The cost and efficiency advantages are obvious.

The cost of replacing the filter/plenum is less expensive than filter replacement service and certification.

More information . . .

Vertical & Horizontal Laminar Flow WorkstationsVertical & Horizontal Laminar Flow Workstations

  • Cleanliness Level: Provides better than Class 100 conditions per US Federal Standard 209E.
  • Air Velocity: 90 ± 20 ft/min average when measured four inches from filter face.
  • Prefilter: Disposable medium efficiency (40% by ASHRAE STD 52-68) pleated type.
  • HEPA Filter: Standard filter 99.99% minimum efficiency. Efficiency determined by standard DOP (dioctylphthalate) aerosol challenge. Efficiency rated for all particulates 0.3 microns and larger.
  • HEPA Filter Mounting: All HEPA filters are sealed using our exclusive ZERO BY-PASS PLENUM TECHNIQUE.
  • Blower: Direct drive configuration with forward-curved squirrel cage dynamically balanced and permanently lubricated wheel. No maintenance required.
  • Blower Isolation: Blower are mounted on vibration isolator frames.
  • Noise Level: Less than 65db on the "A" scale at operator's working position.
  • Vibration Level: Essentially vibration free at-work surface because work table need not be coupled to main frame.
  • Certification: All units factory leak checked and certified before shipment using calibrated DOP photometer and generator.
  • A Variety of Sizes and Configurations Are Available.
    . . . More Information

 


MIDSCI is a full-service provider of Laboratory Equipment and Supplies, with an emphasis on life science and Biotechnology research. In addition to Tissue Cell Culture Plastics for Tissue Cell Culture work, we also have a complete line of related products for Tissue Cell Culture such as Centrifuges, Cryogenics, Filtration, Medias, Refrigerators, Freezers, Water-Jacketed Incubators, Serum, ELISA/Immuno/AssayEIA/RIA Microplates, Hoods, Shakers, Gloves, Pipet Aids, basically most any product for Tissue Cell Culture.

 

 Tissue Culture Products | Related Products | Tissue Culture Information & Protocols

MIDSCI Home Page | Contact Us

 

Copyright © MIDSCI
280 Vance Road, St. Louis, MO 63088, USA
TEL: 800-227-9997 FAX: 636-225-9998
TECH SUPPORT: 877-227-9911