Tissue Cell Culture Products from TPP and MIDSCI

   TC Products | Related Products | TC Information & Protocols | MIDSCI Home Page | Contact Us
Tissue Cell Culture Products

Other Tissue Cell Culture Related Products

Tissue Culture Information & Protocols
TPP Tissue Culture Product for the Laboratory

Tissue Cell Culture Flasks

Tissue Cell Culture Flasks

Our new range of tissue culture flasks, available with filtered or vented caps, is the result of intensive cooperation between user experts and top development specialists. Great importance has been attached to the tissue culture properties of the flask, the accessibility of the flask's interior, and the cap closure.

 

Tissue Culture Properties: The most important requirement of a tissue culture flask is an even surface refinement in the growth zone. This inside surface treatment by TPP provides an optimal growth surface on the flask base for the most varied matrix-dependent tissue cultures. The untreated side and top inside surfaces reduce the amount of cell loss during the separation phases, because undesired tissue adhesion outside the growth zone is diminished.

 

Accessibility: The flask's innovative shape is of such a design that devices inserted through the flask's neck have optimal access to the entire base surface. This means that there are no "dead" corners that cannot be reached with pipettes or cell scrapers. This excellent accessibility is due to the large neck opening and the favorable angle of inclination. The angled neck also reduces the chance of accidental spills and permits "dribble-free" pouring.

 

Vented or Filtered Tissue Culture Flask Caps from TPP

Vented Caps: When the vented screw cap is tightened to the end position, the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn, the flask is in the "VENT" position, with the inside of the flask being aerated through a defined gap opening. This guarantee that the gas exchange with the environment and the possible risk of contamination are kept to a minimum. In addition, the special flat thread profile of the caps stops excess tightening and thus allows the caps to be re-used multiple times.

 

Filtered Caps: The TPP filter cap has a welded membrane in the cap cavity to offer free gas exchange without gas flow alteration. For optimal flask breathing, all membranes are proportionally dimensioned to each cap size. The microporous hydrophobic membrane (cytotoxic free) itself is constructed of 2 layers of membrane material based on a white acrylic copolymer over nylon support. With an airflow rate of 4.5 (LPM/3.7cm2/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks.


Order#

Cap

L x W x H
(cm)

Growth Area
(cm)

Qty/Case

TP90025

Vented

9 x 5 x 2.5

25

360

TP90075

Vented

15 x 8.5 x 3.5

75

100

TP90150

Vented

20.5 x 12 x 4.5

150

36

TP90026

Filtered

9 x 5 x 2.5

25

360

TP90076

Filtered

15 x 8.5 x 3.5

75

100

TP90151

Filtered

20.5 x 12 x 4.5

150

36

TP90301

Filtered

30.5 x 17 x 4.5

300

18


TPP90900

Vented Cap

fits TP90301, TP90551,TP90651 & TP90151

20/pk

Click here for more information and online ordering

 


MIDSCI is a full-service provider of Laboratory Equipment and Supplies, with an emphasis on life science and Biotechnology research. In addition to Tissue Cell Culture Plastics for Tissue Cell Culture work, we also have a complete line of related products for Tissue Cell Culture such as Centrifuges, Cryogenics, Filtration, Medias, Refrigerators, Freezers, Water-Jacketed Incubators, Serum, ELISA/Immuno/AssayEIA/RIA Microplates, Hoods, Shakers, Gloves, Pipet Aids, basically most any product for Tissue Cell Culture.

 

 Tissue Culture Products | Related Products | Tissue Culture Information & Protocols

MIDSCI Home Page | Contact Us

Copyright © MIDSCI
280 Vance Road, St. Louis, MO 63088, USA
TEL: 800-227-9997 FAX: 636-225-9998
TECH SUPPORT: 877-227-9911